SEPCAST - Cast Submersible Pumps

Clean or slightly dirty (max 50 g/m³ sand content) waters.
  1. Water supply for domestic use
  2. Water supply for industrial use
  3. Villages, towns and cities water network
  4. Water supply of hotels, hospitals, holiday resorts
  5. Irrigation, sprinkler, dripping systems
  6. Circulation of clean water, demineralized water
  7. Boosting of clean water, demineralized water
  8. Lowering ground water level
  9. Fire-fighting systems
  10. Heating and air conditioning



















Capacity (Q)  :up to 576 m³/h
Head (Hm)  : up to 650 mWc
Operating Temperature (T)  : up to 30 °C
Allowable solid(sand) content  : Max. 50 g/m

* For higher head and temperature options contact with SEP Pump.

SEPCAST series deep well submersible electric pumps are designed and built for safety operation of supplying underground water. They’re also used to pump the water from stagnant water sources such as reservuars, lakes, sea and damps. Pump and motor set are installed and run completely under water. They are high efficient and long life pumps for continuous operations.

SEPCAST submersible pumps run silent. They don’y have shaft-cut problems because of running in curvature boreholes. Installation and service operations are very easy. Discharge part of the pump has a built-in checkvalve inside to prevent back flow. Pipe connection to the discharge of the pump is generally threaded type. Flanges can be used upon request. As a general rule of the pumps, pumps shouldn’t run at closed valve and reverse direction.

Bowls of the SEPCAST submersible pumps are casted. Materials of casting may vary according to chemical and physical properties of the pumped water. However, cast iron and bronze materials are widely used.

SEPCAST submersible pumps and motors are connected to each other by a rigid coupling. Dimensions of the connection are according to the NEMA standards.